Tutorials & Pro-Tips

Usage Cycle: Drag for 4 seconds max, then lift off and pause for 5 seconds before the next drag. After riding, the slider stays hot: let it cool for at least 5 minutes before you touch it.
Light Pressure: Do not press down hard. A very light touch is all you need for the best sparks.
Spark Amount: The number of sparks depends on how rough the surface is.
Superglue: Use a very small amount. The glue needs air to cure properly. If you use too much, it will stay liquid inside.
Adhesive Pad: Remember to peel the protective film off both sides of the double-sided adhesive pad. This is a common mistake!
Fingerslider: Use the larger hole for your middle finger. This helps to position the ring correctly.
Skateboard: The included screwdrivers are for emergencies. A power drill works much better and faster.

This is an experimental product for novelty use. Use at your own risk.
Fire Hazard: Sparks can ignite flammable materials. Be aware of your surroundings.
Not for road traffic. These are not approved for use on public roads.
Do not inhale the smoke. Ensure proper ventilation during use.