Tutorials & Pro-Tips
General & Product Pro-Tips
- Usage Cycle: Grind for a maximum of 4 seconds, then let it cool down for 5 seconds. This dramatically increases the product's lifespan.
- Light Pressure: Do not press down hard. A very light touch is all you need for the best sparks.
- Spark Amount: The number of sparks depends on how rough the street surface is.
- Superglue: Use a very small amount. The glue needs air to cure properly. If you use too much, it will stay liquid inside.
- Adhesive Pad: Remember to peel the protective film off both sides of the double-sided adhesive pad. This is a common mistake!
- Fingerslider: Use the larger hole for your middle finger. This helps to position the ring correctly.
- Skateboard: The included screwdrivers are for emergencies. A power drill works much better and faster.
Safety Warning
- This is an experimental product for novelty use. Use at your own risk.
- Fire Hazard: Sparks can ignite flammable materials. Be aware of your surroundings.
- Not for road traffic. These are not approved for use on public roads.
- Do not inhale the smoke. Ensure proper ventilation during use.